Introduction
When a patient checks into a hospital bed, the last thing they should worry about is what's touched that pillow before them. These disposable pillow covers solve that problem simply - made from PP nonwoven fabric, they're soft enough for comfort but tough enough to stop cross-contamination between patients, one use at a time.
Description
We make these covers from PP nonwoven material, chosen because it strikes a good balance - breathable so patients don't overheat, soft against the skin, yet sturdy enough to do its job as a barrier. The design is straightforward: one open side with a folded-back edge, so nurses can slip it onto a pillow in seconds without fumbling. No learning curve, no wasted time during a shift change.
Specifications
Standard options:
- Material: PP nonwoven fabric
- Size: 50×70cm or 60×80cm (most common hospital sizes)
- Weight: ranges from 18gsm up to 55gsm depending on what you need
- Style: one side open, folded-back closure
- Colors: blue and white - still the go-to choices for most hospitals
- Packed 10 per bag, 500 per carton
If you need something different, we can adjust:
- Dimensions outside the standard range - tell us your pillow size and we'll match it
- Thickness anywhere across the 18-55gsm spectrum, or a custom weight if your application calls for it
- Colors beyond blue/white if your facility has specific branding or department color-coding
- Bag and carton counts to suit your storage or distribution setup
- Printed logos for facilities that want their covers branded
What Makes These Different
Honestly, a lot of pillow covers on the market look similar on paper, so here's where the real differences show up:
The fabric itself matters. Cheaper nonwoven covers tend to feel stiff or papery. Ours is manufactured to stay soft through the full weight range, so even the thinner 18-20gsm versions don't feel scratchy against a patient's face.
It's genuinely disposable, not just marketed that way. Single use means no bacteria carryover, no biofilm buildup that reusable fabric covers can develop even after washing. For infection control teams, that's not a small detail.
The economics add up over time. Hospitals using fabric pillow covers are paying for laundering - water, detergent, labor, equipment wear. Switching to disposables removes that whole line item. At scale, across hundreds of beds, that difference becomes significant.
Storage is a non-issue. Compressed packaging means a supply closet that used to hold a few dozen fabric covers can now hold thousands of disposable ones.
Styles Available
- Open-end with folded back - this is the standard, and for good reason. Fast to apply, works for general wards, ICU, recovery rooms.
- Fully enclosed with inner flap - a bit more coverage, suited to longer patient stays where you want extra assurance the cover won't shift.
- Elastic-edge version - same open-end concept but with elastic for a snugger fit, useful if your pillows vary slightly in size.
- Heavier-weight premium version (45-55gsm) - softer feel for private rooms or maternity wards where comfort expectations run a bit higher.
Why Hospitals Choose This Product
Procurement teams tend to care about cost per unit and consistency - this delivers both, especially at volume. Infection control staff care about whether something actually reduces risk, not just checks a compliance box, and single-use fabric genuinely does that. Nursing staff, frankly, just want something that's quick to put on and doesn't tear mid-shift, and the folded-back design holds up to that.
There's also a practical environmental angle worth mentioning: no laundering means no water or energy spent washing covers repeatedly, which for some facilities factors into sustainability reporting.
Where It's Used
Mostly general wards, ICUs, ER, and surgical recovery, but we also see steady demand from nursing homes, hospice care, outpatient clinics, and even mobile medical units and ambulances. Anywhere a pillow gets reused across different people, this fills a gap.
FAQs
- Is it sterile? Not by default - these are clean, hygienic covers, not sterile ones. If you need sterile packaging for surgical or ICU use, let us know and we'll arrange it.
- How long do they last in storage before use? Typically 3-5 years unopened, assuming they're kept somewhere dry and out of direct sun.
- Can it hold up against fluids? Depends on the weight. Lighter gsm is fine for general use, but if fluid resistance matters for your ward, go with 35gsm or higher - 50-55gsm is the safest bet for heavier exposure.
- Will it fit our pillows? Standard 50×70 and 60×80 covers fit most hospital pillows, but if yours are a different shape, just send us the measurements and we'll size accordingly.
- What's the minimum order? Generally 10,000 pieces, though we can sometimes work with smaller trial orders - worth asking.
- Can we get samples first? Yes, and we'd actually recommend it before committing to a bulk order.
- How long does production take? About 15-20 days for standard specs, closer to 25-30 days if you're going custom.
Before Placing a Bulk Order, We'll Need
To give you an accurate quote and make sure what you get actually fits your use case, it helps to confirm:
- The exact size you need (length × width)
- Preferred weight/thickness (gsm)
- Color - standard blue/white or something custom
- Order quantity, both for this purchase and roughly what you'd need annually
- Where it's shipping to
A few more details that help but aren't strictly required upfront:
- Which style fits your use case (open-end, enclosed, elastic, etc.)
- Packaging preferences - pieces per bag, bags per carton
- Any special requirements, like fluid resistance or extra softness
- Logo or branding, if you want it printed
- Certifications your facility requires (CE, FDA, ISO, etc.)
- Whether sterilization is needed
- Your timeline for delivery
- Target price range, so we can tell you early if expectations are realistic
If this is your first order with us, it's also worth sharing what you're currently using - current pillow dimensions, your existing cover specs, and your typical monthly volume - so we can make sure the switch is a smooth one.
Hot Tags: disposable pillow covers for hospital, suppliers, manufacturers, price, bulk, for sale, in stock, , Nonwoven Pillow Protector Square Shape, , Hydrophilic Disposable Pillow Case
